CSP (Containment Service Providers) Unit 4, East Link Business Park, |
Splitting Dispensing Flexible Isolators
The splitting / dispensing containment system consists of a flexible isolator mounted on a stainless steel table. This dispensing system can be used for both drums and bags full of product.
Drum Dispensing: The table or the frame of the unit will incorporate a drum attachment ring with a containment belt on it which allows the drum to be connected to the system in a fully contained manner. A drum lifter or scissors lift can be used if required and the design of the system will incorporate the need for this. The liners within the drum containing the product can then be accessed and opened inside the flexible isolator. The dispensing process can then begin and there will also be a weighing scales inside the unit for accurate dispensing.
Bags of Product: In this case, the dispensing system will consist of a number of chambers. These chambers will enable the operator to feed the bags of product into the dispensing system without exposing the working chamber. Again, the dispensing process can then begin and there will also be a weighing scales inside the unit for accurate dispensing.
Features of Splitting / Dispensing Containment Systems:
- Fully sealed system.
- Air handling can be incorporated. (see intelligent flow)
- Numerous chambers can be incorporated into the design to allow for safe feed in / out of materials or product.
- Service manifold can be incorporated.
- Weigh scales can be placed inside the system for accurate dispensing.
- Trash ports and sleeves also incorporated for safe disposal of waste.
- A split butterfly valve can be installed on the offload port, enabling the use of our product bags.
- Mobile unit – Stainless steel table has lockable antistatic castors.
Benefits of Splitting / Dispensing Containment Systems:
- Custom designed to suit the customer’s requirements.
- Flexibles are fully disposable when finished with.
- Solid parts of the system can be cleaned and reused.
- Reduced cleaning and cleaning validation costs.
- Fast turnaround / installation.
- Low capital and operating costs.
- Clear flexible material allows the use of the existing light in the production area.
- Good ergonomic performance.
- Very mobile containment system. Can be removed from the production floor when finished with and brought back again when needed.
- Utilities can be introduced to this system in a contained manner.
- Accurate dispensing.
Dispensing to CSP Bottle Bags.